The Sunvision 28LE 2F tanning bed provides unmatched tanning versatility. The Sunvision 28LE 2F is one of our most versatile tanning beds because it
offers you two ways to tan; SolarMax™ IFT face tanners on or face tanners off, but with low intensity,
100-watt lamps on, showering the facial area with low pressure UV. The Sunvision 24S adds to that
versatility with a shorter tanning bed, allowing installation into a smaller tanning salon room. Either
tanning bed would make a great revenue addition to your hair or nail salon.
lamps |
28LE
- Canopy: 14 x 100 watt Wolff® system lamps
- Bench: 14 x 100 watt Wolff® system lamps
- Optional facials: 2 x 400 watt Heraeus lamps with SolarMax™ IFT facial glass
24S
- Canopy: 12 x 100 watt Wolff® system lamps
- Bench: 12 x 100 watt Wolff® system lamps
- Optional facial: 1 x 400 watt Heraeus lamps with SolarMax™ IFT facial glass
session time |
- 20 minute tanning session
special features |
- Extruded aluminum and steel mainframe
- EnduraPlus™ exterior
- 28LE - 7 foot, curved tanning surface
- 24S - 6 foot, curved tanning surface
- Quick Clip™ acrylic removal system
- Biotech™ tunnel design
- High-tech digital timer with built in hour meter
- Wireless T-Max® compatible
cooling system |
- Advanced after tan cooling system
- Superflow internal cooling system
warranty |
dimensions |
28LE
- 87.75"L x 35"W x 48"H
- Recommended room size: 9'L x 6'W
24S
- 75.75"L x 35"W x 48"H
- Recommended room size: 8'L x 6'W
power |
| Sunvision 28LE |
- 220 VOLT dedicated circuit
- 30 AMP circuit breaker
- 30 AMP NEMA #L6-30R receptacle
|
|
| Sunvision 24S |
- 220 VOLT dedicated circuit
- 20 AMP circuit breaker
- 20 AMP NEMA #6-20R receptacle
|
|
IMPORTANT: Voltage must be less than 230 VAC or may require Buck Booster. Consult an electrician.
 |
ETS Tanning Beds are ETL tested and listed for your personal safety and peace of mind. |
downloads |
Protective eyewear is required for indoor tanning and must be worn by everyone in a room with an operating tanning bed.
|
